Do not spin the bearing with compressed air because this will damage the bearing surfaces. 17 глава

	CABLE ROUTING		SPEC
1 Rear brake lock lever cable
A Crankcase breather hose
2 Throttle cable (decelerator cable, double lock-	B Throttle cable (accelerator cable, single locknut)
nut)
3 Fast idle inlet hose	И Pass the rear brake lock lever cable to the cable
4 Rear brake hose	guide.
5 A.C. magneto lead	Й Route the wire harness through the frame guide.
6 Fuel tank breather hose	К Pass the fuel tank breather hose by the outside
7 Coolant hose	of the wire harness.
8 Sidestand switch
9 Fast idle outlet hose
0 Radiator outlet hose

 

	И		М
		К
	Й	Л
	3 4		Н
B
A
П 0 9 О
		2 - 64

CABLE ROUTING ^SPEC

 

Л Pass the wire harness by the outside of the rear footrest mounting boss. (When installing the rear

footrest, do not catch or pinch the A.C. magneto lead in the bracket.)

 

М Fasten the wire harness to the frame with a plas-tic holder.

 

Н Pass the storage box light switch lead by the front of the frame back stay pipe.

 

О Fasten the sidestand switch lead to the frame with a plastic holder.

П Pass the front wheel sensor lead to the lead holder (2 locations).

 

	И		М
		К
	Й	Л
	3 4		Н
B
A
П 0 9 О
		2 - 65

CABLE ROUTING ^SPEC

 

1 Rear brake lock lever cable	B Battery	M Fuel injector lead #2
2 Cooling system air bleed hose	C Seat lock	N Seat lock cable
3 Thermostat outlet hose	D Positive battery lead	O Wire harness
4 Fuel tank breather hose	E Fuel pump lead	P Storage box light connector
5 Fuel hose	F Fuel overflow hose
6 Turn signal/hazard relay	G Intake air pressure sensor
7 Starting circuit cut-off relay 1	H Hydraulic unit solenoid coupler
8 Negative battery lead	I ABS motor coupler
9 Starting circuit cut-off relay 2	J Meter assembly coupler
0 Rectifier/regulator	K Intake air temperature sensor
A Starter motor lead	L Frame

 

		Й	К 1 Л	Н			M
	И			М
	AK				Н
AJ				L
				A-A
K								A
					О			N
J
AI	I				П		OAL
					Р
	AH			A
		A
	H			B-B
					B
		AG
			AF			B	6 7
			G	AD			8 9
			AE
				F				Т
							С
				AC
							У
								Ф
					E
			AM		A 8			A Х
					AB
				O	N			Ц
			P	AA
						Ч
			D	D	Б	D	C
			Ш
						А		Щ
						Я		C
				C-C		Ю D C Э Ь B Ы Ъ
					2 - 66

CABLE ROUTING ^SPEC

 

И Route the wire harness against the stay 1 wire guide.

 

Й Fasten the lean angle cut-off switch lead to the stay 1 with a plastic band. Face the band end to the downward.

 

К To the main switch

 

Л Route the lean angle cut-off switch lead through the back of the mirror stay (cross pipe).

 

М Fasten the cooling system air bleed hose to the frame with a plastic holder.

Н Fasten the rear brake lock lever cable to the frame with a plastic holder.

 

О Be sure not to pinch the storage box light switch lead when installing the fuel tank.

 

П Connect the fuel injector leads and intake air pressure sensor lead, storage box light switch lead to the pipe guide with a plastic holder. Con-nect the couplers in right side of the holder.

 

Р Pass the wire harness and seat lock cable through the guide.

 

		Й	К 1 Л	Н			M
	И			М
	AK				Н
AJ				L
				A-A
K								A
					О			N
J
AI	I				П		OAL
					Р
	AH			A
		A
	H			B-B
					B
		AG
			AF			B	6 7
			G	AD			8 9
			AE
				F				Т
							С
				AC
							У
								Ф
					E
			AM		A 8			A Х
					AB
				O	N			Ц
			P	AA
						Ч
			D	D	Б	D	C
			Ш
						А		Щ
						Я		C
				C-C		Ю D C Э Ь B Ы Ъ
					2 - 67

CABLE ROUTING ^SPEC

 

С Connect the seat lock cable (black) to the right seat lock.

 

Т Pass the seat lock cable (black) between the negative battery lead, starter motor lead and the frame.

 

У Route the negative battery lead and the fuse box lead from the storage box opening to the bottom of the cross pipe.

 

Ф Route the fuse box lead above the starter motor lead.

Х Place the rubber cover over the starter relay, starter relay coupler, positive battery lead termi-nal, and starter motor lead terminal.

 

Ц Align the plastic clamp with the white tape on the wire harness and fasten to the frame.

 

Ч Fasten the wire harness and seat lock cable to the frame with a plastic holder.

 

Ш Pass the wire harness, lead and cable the out-side of the frame bracket.

 

Щ Install the starter relay to the mad guard.

 

		Й	К 1 Л	Н			M
	И			М
	AK				Н
AJ				L
				A-A
K								A
					О			N
J
AI	I				П		OAL
					Р
	AH			A
		A
	H			B-B
					B
		AG
			AF			B	6 7
			G	AD			8 9
			AE
				F				Т
							С
				AC
							У
								Ф
					E
			AM		A 8			A Х
					AB
				O	N			Ц
			P	AA
						Ч
			D	D	Б	D	C
			Ш
						А		Щ
						Я		C
				C-C		Ю D C Э Ь B Ы Ъ
					2 - 68

⇐ Предыдущая17181920212223242526Следующая ⇒

Поделиться:

Воспользуйтесь поиском по сайту: