Главная | Обратная связь | Поможем написать вашу работу!
 МегаЛекции

8-2 Error Code Description. Error code formation. 1st byte. 2nd byte. 4th byte meaning




8-2 Error Code Description

Error code formation

1st byte

2nd byte

3rd byte

4th byte meaning

SVC COM SVC (STATUS_SVC+0) //USB chip. After 0. 5 second, the USB havenЎЇt started, maybe itЎЇs broken
ЎЎ CoreBoard SVC (STATUS_SVC+1) //FPG chip 1. After connecting power, stay in high position, the chip may be broken
ЎЎ Software SVC (STATUS_SVC+2) //FPGA chip 2. Lower the n setting, but it still in the high position
ЎЎ Sensor SVC (STATUS_SVC+3) //FPGA chip 3. N setting has high voltage
ЎЎ Passwd SVC (STATUS_SVC+4) //FPGA chip 4. When setting the FPGA, false alarming or retried 10 times
ЎЎ ЎЎ Unk SVC (STATUS_SVC+5) //failed update of the MB
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+6) //no factory initialization for the board
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+16) //failed in test of factory toolЎЇs memory
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+7) //failed in the test of dynamic memory
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+8) //cannot read FPGA in the flash memory
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+9) //the dynamic memory is small, cannot support the current setting
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+10) //false reading of the boardЎЇs ID
ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+11) //systemЎЇARM initialization error
ЎЎ ЎЎ ЎЎ ЎЎ SVC (STATUS_SVC+12) //false HB initialization
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
FTA ЎЎ ЎЎ FTA (STATUS_FTA+0) //USB chip restarted unusually
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+1) //false printing data format
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+2) //false printing data size
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+3) //there should be no appendixes data
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+4) //real PASS number doesnЎЇt match the number in the setting
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+5) //the usb dataЎЇs format is wrong
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+6) //after finishing one PASS printing, DMAO is still working
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+7) //false starting position or ending position
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+8) //the starting position doesnЎЇt reach the origin position
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+9) //printing width exceed the limitation
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+10) // movement controlЎЇs first stage initialization failed.
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+11) //movement controlЎЇs second stage initialization failed.
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+12) //HBЎЇs first stage initialization failed.
ЎЎ ЎЎ ЎЎ FTA (STATUS_FTA+13) //HBЎЇs second stage initialization failed
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+14) //MBЎЇs LVDS chip unlocked, or the wire hasnЎЇt been inserted
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+15) //direction value of PASS definition exceeded.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+16) //updating failed
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+17) //read RAM failed
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+18) //write in RAM failed
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+19) //Board havenЎЇt finished default setting
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+20) //MB has been restarted
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+21) //Spectra high voltage boardЎЇs first stage initialization failed
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+22) //print head type from the HB unmatch the setting type, replace the HB or reset the hardware parameter.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+23) //the control system unmatch the software version. Replace the control system or update the software version.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+24) //exceed time limit, re-entry code.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+25) //inner error, blank PASS or no Y-axial feeding
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+26) //connect to USB1. 1, fatal error
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+27) //language of the interface is unmatched to the limit. Reset the language or password.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+28) //PINCONF write in FPGA error
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+29) //color number in the factory tools is wrong
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+30) //false input to the MBЎЇs RAM
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+31) //print head exceed 55 celsius, all the heating are forced to close.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+32) //software error or version error.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+33) //Software version error. The hardware need special software version.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+34) //current system doesnЎЇt support one head two color.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+35) //exceed the ink quantity limitation, reset the code.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+36) //software version error. The hardware require the software to support the ink code.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+37) //EPSON print head error.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+38) //EPSON MB FPGA error. Usually, it result from over-frequency or disturbing of data.
ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+39) //writing board ID error
ЎЎ ЎЎ ЎЎ ЎЎ FTA # (STATUS_FTA+40) //default setting error
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
ERROR ЎЎ ЎЎ ERR (STATUS_ERR+0) //EP0 order has been broken down
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+1) //connect to USB 1, itЎЇs a fatal error
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+3) //overtime of communication between MB and HB
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+2) //overtime of movement communication
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+4) //PASS data unfinished
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+5) //printing data is less than ignition data, or invalid strike process
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+6) //printing data is larger than ignition data
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+7)
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+8)//inner status
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+9) //FPGA got false order
ЎЎ ЎЎ ЎЎ ERR # (STATUS_ERR+10) //there are ignition order when the moving speed is too fast or uneven
ЎЎ ЎЎ ЎЎ ERR # (STATUS_ERR+11) //30 seconds after sending move order, havenЎЇt got finish order
ЎЎ ЎЎ ЎЎ ERR # (STATUS_ERR+12) // false clearing order, which should be stopped
ЎЎ ЎЎ ЎЎ ERR # (STATUS_ERR+13) //false clearing order, which should be stopped
ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+) // test status 1
ЎЎ ЎЎ ЎЎ ЎЎ ERR (STATUS_ERR+0x51) //test status 1
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+0) //initializing MB
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+1) //initializing USB
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+2) //initializing FPGA
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+3)//initializing movement
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+4) //initializing HB
ЎЎ ЎЎ ЎЎ ЎЎ INI (STATUS_INI+5) //Spectra is initializing high voltage board
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
Warning ЎЎ ЎЎ WAR (STATUS_WAR+0) //undefined data mark, it will be ignored
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+1) //EP0 data transfer unfinished, receive new EPO data at the same time, the previous data will be ignored
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+2)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+3)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+4)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+5)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+6)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+7)
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+8) //input error of timing code, there are character out of 0~F
ЎЎ ЎЎ ЎЎ WAR (STATUS_WAR+9)// illegal timing code.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+10) //timing code doesnЎЇt match the supplier.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+11) //timing code doesnЎЇt match the board.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+12) //another 100 hours, it will exceed the time limitation. First warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+13) // another 50 hours, it will exceed the time limitation. Second warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+14) //another 1 hour, it will exceed the time limitation. Final warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+16) // input error of selective code, there are character out of 0~F.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+17)//illegal selective code.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+18) //the selective code doesnЎЇt match the supplier.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+19) //the selective code doesnЎЇt match the board.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+20) //sensor connecting the ink tank and ink pump doesnЎЇt work
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+21) // attempt to over clocking, but failed, as the main board doesnЎЇt support.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+22) //input error of ink code, there are character out of 0~F.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+23)//illegal ink code
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+24) //ink code doesnЎЇt match the supplier.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+25) //ink code doesnЎЇt match the board.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+26) // another 10 liters ink, it will exceed the ink limitation. First warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+27) //another 5liters ink, it will exceed the ink limitation. Second warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+28) //another 1liter ink, it will exceed the ink limitation. Final warning.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+29) //only support Konica and Polaris heads. For other head, the ink drop is always 42pl.
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+30)
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+31)
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+32) //print data under ignition frequency or invalid ignition
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+33) //print data exceed the ignition frequency
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+34) //head temperature too low
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+35) //head temperature too high
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+36) //print head didnЎЇt connect
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+37) //FPGA feedback too much
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+38) // FPGA feedback too less
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+39) //nozzle number unknow
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+40) // head temperature too high
ЎЎ ЎЎ ЎЎ WAR # (STATUS_WAR+41) //XHOT error.
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+1) //Can not use (STATUS_UPDATING+0)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+2)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+3)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+4)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+5)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+6)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+7)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+8)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+9) //ARM flash erease or write error, 10 times retry
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+10)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+11)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+12)
ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ ЎЎ (STATUS_UPDATING+13)

 

Поделиться:





Воспользуйтесь поиском по сайту:



©2015 - 2024 megalektsii.ru Все авторские права принадлежат авторам лекционных материалов. Обратная связь с нами...