 |
General safety guidelines. The power supply cord or plug is damaged;. Liquid into printer;. Printer smokes or makes abnormal odour;
|
|
|
|
General safety guidelines
l Before connecting the printer to the power supply, refer to the installation instructions.
l When either of the following conditions occurs, turn off the printer, unplug the power cable of the machine from the outlet and contact local dealers.
The power supply cord or plug is damaged;
Liquid into printer;
Printer smokes or makes abnormal odour;
Printer drops, or drying damage;
Printer's built-in residual current circuit breaker (ground fault of earth leakage protective device) has repeatedly tripped;
Fuse doesnЎЇt work;
The printer is not functioning properly;
l When either of the following conditions occurs, turn off the printer, unplug the power cable of the machine from the power outlet.
Thunderstorms Weather;
Power off during printing;
Important safety guidelines
l Do not insert anything into the printerЎЇs platform, Carefully not to let liquid spilled in the printer;
l Can only use the type of power source that he printer's label identifies. According to the different countries and regions, may use 110V or 220V AC;
l All devices connected to a properly grounded outlet, avoid socket with photocopiers or air conditioning system used by these rules to switch between on and off the device in the same loop;
l Avoid using wall switches or automatic timers controlled outlet.
l Keep your computer system away from potential sources of EMI, such as speakers or cordless telephone.
l Do not use the damaged or worn Power cable.
l If you use the attached Power cable, make sure to insert the extra total amps of power line devices do not exceed the rated amps of the power supply, in addition, make sure to insert total number of amperes of all devices on the wall do not exceed the rated amperage of the wall outlet;
Precautions During Printing
l When turn on the printer, do not move the print head with hand or the printer may be damaged;
l Always use the power switch to turn off the printing, but when the button is pressed, the power supply will be cut off. Before the power is cut off, do not unplug the printerЎдs plug or cable.
l Before moving the printer, ensure that the print head in the initial position, and fixed.
Electric Shock Dangerous
 |
Printers use two power cable. Before repairing the printer, please unplug the two Power cable. The printer can only be connected to a grounded AC outlet.
To avoid the risk of electric shock, please keep the following in mind:
l Do not attempt to remove the dryer or electric control cabinet.
l Do not remove any other closed or open cover or plugs.
l Do not insert any objects in the slot of the printer.
 |
|
|
|
Dangerous Of Getting Burn
Drying system running under the high temperature of the printer, if touched, can cause burns. To avoid personal injury, please note the following precautions:
l Do not touch the printer drying systemЎдs interior cover. Even after power is disconnected from the drying systems, internal surface may still be very hot.
l When contact material drying channel, special care should be taken.
Fire Disaster
The printer produces high temperature drying system at run time. If the printer's built-in residual current circuit breaker (earth fault leakage protector) trip repeatedly, please call your local dealer.
To avoid a fire hazard, please note the following precautions:
l Use the power supply voltage specified on the nameplate.
l Connect the Power cord to a dedicated line, and according to the wall outlet's rated parameters, use the branch circuit breaker protection for each line.
l Do not use the same power strip (insert row= to connect the two power cables.
l Use only the Xunlang Power cord that together provided with the printer.
l Do not use a damaged power cord. Do not use the Power cord supplied by the other products.
l Do not place any objects in the slot of the printer.
l Be careful not to liquids spilled on the printer.
l Do not use the products which contain flammable gases of spray near or inside the printer.
l Do not stuck or block the printer opening.
l Do not attempt to remove the drying systems or electric control cabinet.
l Mounts to 125 Ўг c (257 Ўг f) operating temperature and the temperature of spontaneous combustion higher than 250 Ўг c (482 Ўг f) materials (media).
|
|
|
